Yes, condensation is perfectly normal. However, it is important to clean the machine regularly to prevent the condensation causing any corrosion to the surfaces.
Properly cleaning and wiping away condensation from the cooling chamber, can also help to prevent cooling issues with your appliance.
Please note that corrosion is not covered by the warranty of the machine.
Still have a question? Get in touch!
When a keg is loaded in Blade, it should stay plugged in. We recommend unplugging the appliance when it does not have a keg installed.
Still have a question? Get in touch!
No. You will hear the fan at the back of the cooling system when the appliance is cooling the keg.
Still have a question? Get in touch!
No. You will hear the air pump inside the appliance during pouring. After closing the tap, the pump will be in operation until the controlled pressure is reached. This can take a few seconds.
Still have a question? Get in touch!
The Blade appliance chills to 2 °C and cannot be set to any other temperature.
Still have a question? Get in touch!
Unplug the Blade before cleaning the inside and outside with a soft cloth. Use a damp cloth to clean the cover and a dry cloth to clean the cooling chamber. The Blade should never be immersed in water. Harsh cleaning agents may damage the appliance.
Clean the drip tray with warm, soapy water after every use.
We recommend cleaning the tap every time you load a new keg to avoid contamination and mixing different kegs.
Still have a question? Get in touch!
